Vortex 250 PRO - FPV Racer (RTF)

Vortex 250 PRO - FPV Racer (RTF)

Ausverkauft - Mehr ist auf dem Weg.
499,00 €
Inkl. 19% MwSt., zzgl. Versandkosten


Building off of the success of the Vortex 285, and listening to the dreams and wishes of their customers.The Vortex 250 Pro, is Immersion RC's next racer.

Swapping out the ‘F1’ processor for the ‘F3’, added an integrated Black Box recorder, swapped out the 1806 motors for potent 2204/2300kV custom motors, Gen2 20A ESCs, Serial receiver support… the list is long and colorful.

As with the Vortex 285, the 250 is ARF, just add a compatible R/C Rx (CPPM, Spektrum, S-Bus, XBus, EzUHF, etc. etc.), and a battery, and go race, everything else is included, from the SpiroNET Tx antenna, to the props.



  • 2204-2300kV Custom Motors, with custom 20A ESCs
  • 250-sized Mini-Quad with 4mm CF arms
  • Beautiful 3k Twill-weave Carbon Fiber and custom injected plastic design
  • Integrated ‘F3’ Flight Controller, pre-loaded with Cleanflight
  • Integrated full-graphic OSD, with on-screen control of.. everything
  • On-board BlackBox recorder to aid in pro-tuning
  • Integrated 40 channel NexWaveRF 5.8GHz Video Tx with Dynamic Power Control
  • Race-tuned out of the box, with Pro-tuning options
  • Tiltable, Vibration-free Camera mount
  • GoPro (3/4) mount included


  • Size (diagonal): 250mm (275mm option for 6" Props)
  • Frame: 2mm Carbon Fiber, with 15x Aluminium Standoffs
  • Motors: Custom 2204-2300kV, 3mm Shaft
  • ESC: 20/22A EzESC
  • Flight Controller:STM32F303 based ('F3')
  • OSD:Full Graphic
  • Arms: 4mm Flat CF
  • BlackBox: 2MB Included
  • Rx Support: Native CPPM, S-Bus, Spektrum, XBus, SumD, SumH
  • Rx Selection: Fully Automatic
  • Case: Zipper case
  • Camera Mount: GoPro 3/4, mount included
  • USB Port: Through-Hole (Much more robust)
  • LED Board: v2, more robust
  • Standoffs: Metal (all of them)
  • FlightCam: 700TVL CMOS v2
  • Weight: ~415g without battery


  • Vortex 250 Pro ARF Race Quad
  • Vortex 250 Pro Zipper case, fits 250 and 270 versions (5" or 6" props), with two zipper pockets
  • 2x ImmersionRC battery straps
  • SpiroNET Omni 5.8GHz antenna(Black cover/SMA)
  • PPM Cable
  • Spektrum compatibility Cable
  • SBus Cable
  • 8x Gemfan 5045BN GFK Props



Es gibt noch keine Produktbewertungen. Warum schreibst du nicht die erste?

Bewertung schreiben

Melde dich an oder registriere dich, um eine Bewertung zu schreiben.

Fragen und Antworten

Bislang wurden keine Fragen zu diesem Produkt gestellt.

Stelle Deine eigene Frage

Benutzername wird angezeigt

Bitte warten...

Vortex 250 PRO - FPV Racer (RTF)

wurde in den Warenkorb gelegt